*
Indicates scenery optimized for use with Ultimate Terrain.
Although
UltimateTerrain is not a necessity to run these sceneries,
it is highly recommended in order for you to view our sceneries
as they were intended.
Release Date
10/16/11
Buttonville CYKZ* Canada's 10th most
active airport strategically located in the heart of
the GTA, this highly-accessible airport serves as a
vital economic link to the region welcoming corporate
visitors, tourists, aviation students and pilots from
around the globe. Compatible with Ultimate Terrain and
Flight Ontario's Greater Toronto Area.
This updates the airport with new Level of
detail (LOD) and new NAV Cananda tower.
Niagara South CNF9
Niagara South CNF9 is a small airport located about
20 kilometres south of Niagara Falls, Ontario, Canada.
This airport was a Relief field during the BCATP days
but today is owned and operated by the Russell Aviation
Group. These people restore old WWII aircraft to pristine
and airworthy condition and fly them at numerous air
shows across North America. Look for some dynamic scenery
as well in the form of vehicles on the airport and surrounding
roads. More about the Russell Aviation Group go to:
http://www.ragairshow.com/about.html.
Gatineau CYND*
Gatineau Executive Airport is the home to VINTAGE WINGS
OF CANADA, a private collection of vintage aircraft
all in flying condition and superbly maintained. The
Vintage Wings hangar in this scenery has articulating
doors and an AI package is included. Most of the aircraft
in this collection can be downloaded with appropriate
skins for use in this FS9 scenery. For more information
about Vintage Wings of Canada go to
http://www.vintagewings.ca/Home/tabid/40/language/en-CA/Default.aspx.
This scenery package is an enhancement of Pierre
Gallant's Gatineau CYND (2005). Many thanks to Pierre
for allowing Flight Ontario to use some of his work
in this release.
Western Canada Landclass* Custom Landclass for
British Columbia, Alberta, Saskachewan and Manitoba.
This scenery area covers all of southern portions of
the provinces tapering off at the borders to the US.
It includes only use of default Landclass. The scenery
is based on "land use" maps found on the
Natural Resource website.
Guelph Air Park CNC4 Update* Home of the
"TIGER
BOYS", vintage aircraft
restorers and pilots, this is another "must Have"
for the General Aviation VFR flyer in Ontario, Canada.
Guelph Air Park (CNC4) is a pilot training airport and
situated close to Kitchener-Waterloo(CYKF), Toronto
Pearson(CYYZ) and Hamilton International(CYHM).
A great history document by resident pilot Glenn Norman
is included in the download. This scenery is set to
line up with Ultimate Terrain.
Deer Lake CYDF* The scenery is very accurate
and with great attention to detail. Designed for Heli
pilots, we have Canadian Helicopters located down the
bay as well as lots of eye candy for the low and slow.
This scenery is also a must for those high in the sky
commercial pilots as well. Land class upgrade covers
the entire southwest to midwest side of the province.
Fly in and around Gros Morne National Park, over Blow
Me Down Mountain, through the Table Mountains, or just
skim the valley past the Marble Mountain Ski Resort.
Added bonus is detailed land class for the Avalon Penn
and around the St John’s area on the east coast.
Grffith Island* North of Owen Sound and
Billy Bishop Regional (CJD3). Situated in Georgian Bay.
Currently home to a private Hunt club plush with deer,
wild turkey, and pheasant.
Lake Simcoe Regional CNB9 Update* Latest update for this
airport. Includes New Hydro One Hangar, new windsocks,
Custom Runway markings and landclass, etc.
Replaces older
scenery.
Thunder Bay UT*
Flight Ontario's
upgraded scenery for FS9 of the Thunder Bay Ontario
(CYQT) area...including Kakabeka Falls Airport (CKG8).
This is the long awaited Ultimate Terrain update. Also
added is the new Ornge hangar and extended runway due
(Oct,2009)
Muskoka CYQA UT*
The Muskoka
Airport (CYQA) is owned and operated by the District
Municipality of Muskoka. A Transport Canada Certified
facility, providing a vital link to the air transportation
industry in the Muskoka area.
Custom Runway and Taxiway Textures
I have always
hated the runway and taxiway textures in FS2004. They
never match in colour, and do not have a weathered look
as in real life. These are texture changes, that
I have created form FSX. They will give a more realistic
look.
Brantford CYFD* Brantford Airport, once
used by the British Commonwealth Air Training Program
as a Service Flying Training School between the years
1940 -1944, is now a fully functioning regional airport
home to the Brantford Flying Club. Nearly two years
in developing this scenery, Brantford CYFD is compatible
with other Flight Ontario sceneries, Ultimate Terrain
Can/Alaska, Ground Environment Pro.
Brantford CYFD Update* Latest update for this
airport. Includes Communication Frequencies updates
and an optional voice pack to be used by EditVoicepack
version 3.1 found on AvSim (search for file name: editvoicepack31.zip).
Collingwood CYN3* The Collingwood Regional
Airport is situated on 392 acres of land in Clearview
Township. It is close to the Blue Mountain ski hills,
golfing and Wasaga Beach, the world's longest freshwater
beach. This scenery is designed for the GA VFR
flight enthusiast...simmers who like short, low and
slow flights. The airports in this scenery have
been re-positioned in the flight simulator to mesh with
Google and Ultimate Terrain’s roads.
Ontario LandClass Ver 3*
*** This replaces all other
FlightOntario landclasses
to date.*** Land for the entire province
of Ontario, Canada. This scenery made possible with
use of data made available by The Ministry of Natural
Resources and also features custom farmland which greatly
enhances the appearance of the dense agricultural regions
against ultimate terrain of the province.
CYYR Goose Bay was
a major NATO training airbase. Some countries
still use it for military training in the summer
months. All the buildings past and present
are visible in photo real detail. Custom ground
and water textures cover the entire area in great
detail. Bush Pilots can enjoy this scenery
as well, as we have recreated 14 coastal communities
and airfields in different levels of detail as accurately
as possible. Accurate coastlines, Piers and
Fishplants as well as local buildings, Lobster and
crab boats, fishing trollers are visible along
the coast from Mary's Harbour north to Nain.
*The fix below is included in this download*
Download this fix only if you installed the Goose
Bay scenery prior to December 20, 2008
This small update fixes a crash to desktop
on some computers while attempting to change seasons,
or from night to dusk and dawn. It is self extracting
and is needed for the previously downloaded version
of Goose Bay.zip
Rockcliffe CYRO*
This scenery is for the small airport at Rockcliffe
CYRO that is within the city of Ottawa, Ontario, Canada
and sits along the picturesque Ottawa River. The Canada
Aviation Museum buildings are included in great detail
as well as the active flying club and the Royal Yacht
Club with its docks. There is also an optional AI package
that includes a very familiar Waco bi-plane! Almost
directly across the river is Gatineau CYND airport and
the Ottawa’s Macdonald-Cartier International is within
a few miles.
Midland/Huronia CYEE*
The Midland Huronia Airport CYEE is situated just south
of the City of Midland, Ontario. The area has custom
Land Class and is designed to mesh with Ultimate Terrain
v1.2. The airport contains custom runway and taxiway
textures and also comes with a custom AI package.
Cranbrook CYXC
This scenery is a rework of Vern Oppermans' Cranbrook.
It has been totally updated to include high detailed
Geographic's for miles in and around the region.
Vern and Al Sibley worked together on this project to
give you the very best rendition of the region.
This includes detailed rivers, landscapes, towns, ski
trails. logging areas and terrain mesh. Great for all
types of flying.
Oakville Terrain
Oakville terrain covers the majority of this town near
the North-West end of Lake Ontario. Some landmarks found
in the scenery include the Ford Assembly Plant toward
the North-East and the Petro Canada oil refinery in
the South-West. Both landmarks are easily noticed as
you make a North-East approach to landing at CYYZ. But
if you prefer a smaller airport, depart from CZBA and
head South-East for 15 kilometers and enjoy the scenery
of this Lakeside town.
Hamilton CYHM*
Flight Ontario's' scenery for CYHM - John C.
Munro Hamilton International Airport. The airport is
located 11 km southwest of the city of Hamilton, Ontario,
Canada and hosts the Canadian Warplane Heritage Museum.
The area has custom Land Class and is designed to mesh
with Ultimate Terrain and our Greater Toronto Area
scenery. Download our Hamilton (CYHM) scenery
add-on, Hamilton area Photo Terrain. This will
greatly enhance the airport experience.
Hamilton area Photo Terrain* Flight Ontario’s CYHM_Photo_Terrain
UT is a four season photo aerial scenery of Hamilton,
Ontario, Canada. The area covered in the scenery is
30 km wide (East West) and 25 km high (North South).
Some landmarks included within this area are the Burlington
Skyway, Hamilton Harbor to the North-East corner to
Binbrook conservation area at the South, Christie conservation
Area near the North-West corner to the outskirts of
Grimsby. The imagery has been adapted to feature a snow
covered winter with frozen lakes for your ski planes
and beautiful fall season of colours. It was created
as an add-on to our Hamilton CYHM UT scenery and is
fully compatible with Ultimate Terrain. Scenery
is downloaded in two parts...both parts are essential.
Lake Simcoe Regional CNB9* Welcome to the gateway
to “Cottage Country” Located sixty miles north
of Toronto equidistant between the Cities of Barrie
and Orillia, Lake Simcoe Regional (CNB9) is situated
adjacent to Lake Simcoe in one of the fastest growing
areas in Canada.
Lake St. John CNJ4* Located in the vicinity
of Casino Rama, seventy miles north of our Greater
Toronto Area release, Lake St John (CNJ4) is in
the heart of Ontario’s cottage country. This is the
home airport of Flight Ontario’s producer Jim Kanold.
This scenery is a must for the seaplane enthusiast.
Greater Toronto Area V2.0* Flight Ontario's
scenery for the Greater Toronto Area for Ultimate Terrain.
The scenery is bound by Detroit in the west, Kingston
in the east, Huntsville in the north and Buffalo in
the south and features: * all-season scenery * custom
water textures * completely modeled Toronto Airports...CYTZ
(Toronto Island) and CYZD (Downsview-home to Bombardier
Aerospace and the Canadair Regional Jet and Dash-8,
and the Toronto Aerospace Museum)
(Download
the CYZD Update for the GTA here)*
Niagara Helicopters CPQ3 (NEW) *custom autogen for the
GTA * Custom landclass for southern Ontario * prominent
features around Hamilton include the Burlington Skyway,
lift bridge and steel mills * the Welland Canal is featured
with lift bridges from Pt Weller to Pt Colborne * the
Niagara area includes two hydro generating plants with
reservoirs * compatibility with SimFlyers CYYZ. Scenery
is downloaded in two parts...both parts are essential.
Thunder Bay V2.0 CYQT Flight Ontario's
upgraded scenery for FS9 of the Thunder Bay Ontario
(CYQT) area...including Kakabeka Falls Airport (CKG8)
and custom coastlines east along the north shore of
Lake Superior to Terrace Bay. The THUNDER BAY V2 scenery
features over 1200 sq. mi. of custom, all-season land/water
class; custom digital elevation model; custom AI traffic
package for CYQT reflecting real-time airline scheduling
along with random AI traffic for CKG8; custom coastlines;
upgraded modelling of the urban area of the City of
Thunder Bay. This new scenery is a must for GA enthusiasts
as well as "bush" fliers.
Brampton CNC3 This scenery is Photo
Real and is an accurate representation of the airport
as it appears today. Two Maintenance hangars numbered
1 and 2 on the main apron have automated doors. (see
readme file for instructions on use) Custom AI traffic
file included. This scenery replaces the original Brampton_AirportV1
and now includes a readme file.
Porter Airlines DCH-8-Q400 Porter Airlines repaint
of the Phoenix Simulation Software (PSS) DHC-8-Q300
payware aircraft. This is a fictional repaint of Porter
Airlines aircraft C-GLQC, a Q400, as a Q300. Original
model required.
Air Labrador DCH-8-Q300 Air Labrador repaint
of the Phoenix Simulation Software (PSS) DHC-8-Q300
payware aircraft. This is a fictional repaint of Air
Labrador aircraft C-FXON, a DHC-8-100, as a Q300. Original
model required.
Provincial Airlines DCH-8-Q400 Provincial Airlines repaint
of the Phoenix Simulation Software (PSS) DHC-8-Q300
payware aircraft. This is a fictional repaint of Provincial
Airlines aircraft C-GPAB, a DHC-8-100, as a Q300. Original
model required.
New Sabre Wheels Replacement Landing Gear
textures for the Section F8 Sabre, intended to be used
with my RCAF Sabre skins. Replaces the original, "too
shiny" default versions.
439 Sqn. RCAF CL-13B Sabre Mk.6 Canadair Sabre Mk.6 23538
of No. 439 "Sabre Toothed-Tiger" Sqn, RCAF,
1 (F) Wing, Marville, France, circa 1962. A repaint
for the Section F8 F-86 Sabre. Original model required.
430 Sqn. RCAF CL-13B Sabre Mk.6 Canadair Sabre Mk.6 23518
of No. 430 "Silver Falcon" Sqn, RCAF, 2 (F)
Wing, Grostenquin, France, circa 1960. A repaint for
the Section F8 F-86 Sabre. Original model required.
413 Sqn. RCAF CL-13 Sabre Mk.2 Canadair Sabre Mk.2 19149
of No. 413 "Tusker" Sqn, RCAF, 3 (F) Wing,
Zweibrücken, Germany, circa 1953. A repaint for the
Section F8 F-86 Sabre. Original model required.
444 Sqn. RCAF CL-13B Sabre Mk.6 Canadair Sabre Mk.6,
serial number 23455, of No. 444 "Cobra" Squadron,
RCAF, stationed at 4 (F) Wing, Soellingen, Germany,
circa 1958. A repaint for the Section F8 F-86 Sabre.
Original model required. NOTE: Bare metal droptanks
are intentional, as the original aircraft had them.
CL-13A Sabre Mk.5, Weapons Flight,
No. 1 (F) OTU. Canadair Sabre Mk.5,
serial number 23353, of the Weapons Flight, No.1 (F)
Operational Training Unit (OTU), based at RCAF Station
Chatham, New Brunswick, Canada, circa 1960. A repaint
for the Section F8 F-86 Sabre. Original model required.
NOTE: The Canadair Sabre
Mk.5 was similar to the late model F-86F with the hard
edged, fenced, 6-3 wing. Section F8 is currently working
on this model of Sabre, until it it released this skin
can be used on the existing F-86E model as a Mk.5 'hack'.
Please ignore the slats ;-)
414 Sqn. RCAF CL-13 Sabre F.4 Canadair Sabre F.4, serial
number 19652, of No. 414 "Black Knight" Squadron,
RCAF, stationed at 4 (F) Wing, Soellingen, Germany,
circa 1954. A repaint for the Section F8 F-86 Sabre.
Original model required.
421 Sqn. RCAF CL-13 Sabre Mk.2 Canadair Sabre Mk.2,
serial number 19350, of No. 421 "Red Indian"
Squadron, RCAF, stationed at 2 (F) Wing, Grostenquin,
France, circa 1953. A repaint for the Section F8 F-86
Sabre. Original model required.
427 Sqn. RCAF CL-13 Sabre Mk.2 Canadair Sabre Mk.2,
serial number 19445, of No. 427 "Lion" Squadron,
RCAF, stationed at 3 (F) Wing, Zweibrücken, Germany,
circa 1953. A repaint for the Section F8 F-86 Sabre.
Original model required.
434 Sqn. RCAF CL-13 Sabre Mk.2 Canadair Sabre Mk.2,
serial number 19449, of No. 434 "Bluenose"
Squadron, RCAF, stationed at 3 (F) Wing, Zweibrücken,
Germany, circa 1953. A repaint for the Section F8 F-86
Sabre. Original model required.
416 Sqn. RCAF CL-13 Sabre Mk.2 Canadair Sabre Mk.2,
serial number 19338, of No. 416 "Lynx" Squadron,
RCAF, stationed at 2 (F) Wing, Grostenquin, France,
circa 1953. A repaint for the Section F8 F-86 Sabre.
Original model required.
CL-13A Sabre Mk.5, Weapons Flight,
No. 1 (F) OTU. Canadair Sabre Mk.5,
serial number 23213 of Gunnery Flight, No.1 (F) OTU,
RCAF Station Chatham, NB, circa 1957. A repaint for
the Section F8 F-86 Sabre. Original model required.
NOTE: The Canadair Sabre
Mk.5 was similar to the late model F-86F with the hard
edged, fenced, 6-3 wing. Section F8 is currently working
on this model of Sabre, until it it released this skin
can be used on the existing F-86E model as a Mk.5 'hack'.
Please ignore the slats ;-)
422 Sqn, RCAF CL-13 Sabre Mk.4. Canadair Sabre Mk.4,
serial number 19627 of No. 422 "Tomahawk"
Squadron, RCAF Station Uplands, Ontario, Canada, circa
1953. A repaint for the Section F8 F-86 Sabre. Original
model required.
410 Sqn, RCAF CL-13 Sabre Mk.2 Canadair Sabre Mk.2,
serial number 19170 of No. 410 "Cougar" Squadron,
RCAF, 1 (F) Wing, North Luffenham, England, circa 1952.
A repaint for the Section F8 F-86 Sabre. Original model
required.
441 Sqn, RCAF CL-13B Sabre Mk.6 Canadair Sabre Mk.6,
serial number 23591 of No. 441 "Silver Fox"
Squadron, RCAF, 1 (F) Wing, Marville, France, circa
1962. Flown by F/O Chuck Winegarden. A repaint for the
Section F8 F-86 Sabre. Original model required.
416 Sqn. RCAF CL-13B Sabre Mk.6 Canadair Sabre 23630
of No. 416 "Lynx" Sqn, RCAF, stationed at
2 (F) Wing, Grostenquin, France, circa 1955. A repaint
for the Section F8 F-86 Sabre. Original model required.
